Fastening system: Chemical Anchors
EDT EURODIMA has a comprehensive programme for the concrete drilling and sawing expert. In addition, we respond also to the needs of building companies. Therefore, we offer you chemical anchors. Reliable products provide the best solution for different requirements:
PURE150PRO - for highest expectations
PURE150PRO – 100 % pure epoxy: For cracked and uncracked concrete, with ETA option 1
Pure epoxy mortar with ETA-option 1 approval, for use in cracked and uncracked concrete. The cracked concrete approval is valid for fixing with normal threaded rods. Further the approval covers threaded rods M8-M30, rebar Ø8-Ø32, overhead applications, dry, wet and waterfilled holes and heavy loads. It has an excellent performance in hammer and roughened diamond drilled holes and can be used for the following base materials; concrete, stone, solid brick and sand-lime stone.
Also recommended for use in marble and natural stone. Suitable for rebar, dynamic loads, large drill hole diameters and low anchorage depths. Because PURE150-PRO is styrene free and has a low odour level, it can be used in unventilated areas. PURE150-PRO is available in cartridge sizes 385ml, 585ml and 1400ml.
The reliable and high-quality chemical anchor!
Available in 385 ml, 585 ml, 1400 ml
AC100PRO – perfect for reinforcments
AC100PRO – Vinylester: Short curing times, with ETA option 7
Vinylester chemical anchor. Quick curing mortar for heavy loads. Excellent performance in rotary hammer drilled holes. Excellent bond to concrete, steel and other materials. Can be used in the following base materials: concrete, stone, solid brick, hollow brick and sand-lime brick. Usable in a wide range of weather conditions, even under wet circumstances. Styrenefree, Styrolfree and odourless. AC100PLUS has an ETA, option 7 for non-cracked concrete.
The fastening depths range from 4xØ to 20xØ. Threaded rods from M8 to M30 and reinforcement bars from Ø8 to Ø32 are approved (in water-filled holes until M16 / Ø16. Mind the short curing times!
Available in 160ml, 300ml, 360ml and 410ml
AC150PRO – reliable and powerful
AC150PRO – Vinylester: For temperatures to -5°C with ETA option 7
Quick curing vinylester mortar with ETA-option 7 approval, for use in uncracked concrete. It is approved for overhead applications, dry and wet holes and heavy loads. It has an excellent performance in hammer drilled holes and can be used for the following base materials; concrete, solid brick, hollow brick and sand-lime stone. .
Approved depths are from 4xØ to 20xØ, and thread rods M8 to M16. You can use it even up to -5°C!
AC150PRO has a bunch of advantages:
Good load capacity, four approved temperature areas, long storage life, low curing times.
Because AC150-PRO is styrene free, styrol free and has a low odour level, it can be used in unventilated areas.
AC150PRO is available in cartridge sizes 385ml, 585ml and 1400ml.
CT50PRO – competitive and fast cured
CT50PRO – Polyester: For concrete and masonry
Styrene free polyester chemical anchor. Low-cost chemical anchor, especially suitable for use indoor. For medium loads in concrete and brickwork. Can be used in the following base materials: concrete, stone, solid brick, hollow brick and sand-lime materials.
Especially the concrete drilling and sawing expert will appreciate the advantageous characteristics of the CT50PRO.
Available in 300 ml, 360 ml, 410 ml
Any more questions?
Please note the ETA approvals (see download links on the right)!
Most of the units can be used with customary dispensers, also from other producers. We are happy to supply the according devices. Contact us!
