braxx control units

braxx control bc200

The compact control and supply unit braxx control bc200 feeds the drive motors of the braxx drilling and sawing units with 20 kW maximum in the high frequency range (up to 1000 Hz).

The unit can be used with the drill motors cdm60 and cdm110, the wall saw sb200, the wire saws wb6P and wb12T, and the circular saw cb350, together with the combination motor eb200 also as drive for the circular saw ZS350 and the bent wall saws WM50/WM90. 

Revolution setting is continuously adjustable -> tailor-made power utilisation

Self-explanatory display with direct and indirect lighting -> easy menu navigation and clearness of display

Stable combination transport trolley with wheels and height adjustment, and transport function for the saw -> low efforts needed for transport

Water supply via transport trolley -> unproblematic water cooling

For sawing, a remote control (see accessories) is needed, which also caters for easy operation -> user moving freely during operation

The bc200 is protected by ground fault circuit interrupter and a line safety switch and a control transformer -> highest possible operational safety

Technical Data

braxx control bc321

The new 2010 model of the control unit braxx control, bc321, feeds the drive motors of the braxx drilling and sawing units with 32 kW.

The bc321 drives all devices that the precursor has driven, too. In comparison, however, you benefit from these benefits:

At full speed, the machine regulates its use of power on different materials -> improved automatic operation makes work easier

Decreased weight in comparison to the old model -> striking 27 % easing

Monitoring the phase outlet in the supply by easily visible illuminated displays -> simple surveillance

The plugs are positioned in a notch on the narrow side -> effective prevention of potential plug damage

The handles have a new, highly ergonomical form -> make the transport again easier

Technical Data