Home > Products > Sawing > braxx system > braxx wire sawing & circular sawing

braxx wire sawing & circular sawing

The EDT EURODIMA wire saw machines are the professional machines for all kinds of sawing application. The use of numerous accessories facilitates flexible working in various areas. Different braxx drives can be combined with the wire saws.

The circular saw is a special version of the wire saw, which is used to cut circular openings into ceilings and walls. Infinitely adjustable cutting diameters from 700 to 3500 mm / 27.5 to 137.8 inch provide maximum flexibility.

 

Electric wire saw appliance WB6P

  • Only minimal setup-times
  • Wire-sparing spring-tension system
  • Double profile at drive wheel: no slipping when starting up
  • Ten components can be disassembled within 5 minutes
  • Our patented universal linking system can be applied at this saw
  • Heaviest single component weighs 21.3 kg / 47 lbs only
  • Diamond wire storage 6 + 2 m / 19.7 + 6.6 ft
  • Cutting speed from 2 to 30 m/sec / 6.5-98.4 ft./sec



Wire saw WB12T

  • User-friendly patented wire saw that can be disassembled 
  • Diamond wire storage from 4 to 16 m / 13.1 to 52.5 inch
  • Diamond wire sparing, electro-pneumatic wire tensioning system 
  • Patented universal linking system - three-wheel wire guide
  • No slipping of drive wheel when starting up due to double profile 
  • Frequency control range 0-87 Hz
  • Cutting speed 2 to 30 m/sec / 6.5 to 98.4 ft/sec
  • Pressure capacity 8 bar
  • Dimensions 1875x620x820 mm / 73.8x24.4x32.3 inch
  • Weight without control unit 229 kg / 504.9 lbs



Circular saw cb350

  • Minimal setup time and low weight
  • Wall thicknesses up to 800 mm / 31.5 inch
  • Saw diameter from 700 to 3500 mm / 2.3 to 11.5 inch Sägedurchmesser
  • Cutting speed infinitely adjustable from 0 to 30 m/sec / to 99 ft/sec