The hydraulic wall saws

The hydraulic system of EDT EURODIMA is a well-proven high-performance system. It is designed in the stable and easy-to-maintain bent sawing construction in order to bear up the toughest operating conditions.

Both wall saws have their electric travel and cut-in motors designed in 24V technique. By using the bayonet connection, the drive motors can be separated quickly. The saw can easily be disassembled into its components.

WM50

The light-weighted hydraulic saw for cutting depths of up to 500 mm / 19.7"

Only 27 kg / 59.5 lbs weight without motor -> low effort needed

Idle saw blade excavation Ø 825 mm / 32.5” -> possible cutting depth with the first blade is 320 mm / 12.6”

500 mm / 19.7” maximum cutting depth with a Ø 1200 mm / 47.2” saw blade -> perfect for standard cuts

Technical Data

Length	365 mm
Width	445 mm
Height	640 mm
Blade hole diameter	50 mm
Pitch circle (flush with wall)	110 mm / 6xM8
Weight with motor	36.00 kg
Weight without motor	27.00 kg
Hydraulic motor	40 cm³
Recommended hydraulic unit	15 oder 20 kW

WM90

The big hydraulic saw for cutting depths up to 900 mm / 35.4"  

Stable and heavy-duty bent saw construction -> uncomplicated servicing

Idle saw blade excavation Ø 1000 mm / 39.3" -> possible cutting depth with the first blade is 400 mm / 15.7"

Maximum cutting depth of 900 mm / 35.4" with a saw blade of Ø 2000 mm / 78.7" -> for the big sawing tasks 

Technical Data

Length	370 mm
Width	480 mm
Height	770 mm
Blade hole diameter	50 mm
Pitch circle (flush with wall)	110 mm / 6xM8
Weight with motor	48.00 kg
Weight without motor	36.00 kg
Hydraulic motor	60 cm³
Recommended hydraulic unit	20 oder 30 kW