/ Perfectly suitable for fastening drill rigs, base plates, wall saws, etc.
/ Corrosion resistance on the outside
/ Suitable for interior and exterior use (not continuously)
/ Anchor only for concrete walls
/ Incl. drive-in tool and container (EURODIMA bucket)
/ Deeper insertion of anchor without collar possible e.g. for broken out drill hole
/ Drop-in anchor with collar prevents sliding deeper
/ Extraction values tested for normal concrete C20/25, uncracked
| M12 | M12 with collar | M16 | |
| Part no. | 1-BZB12SDN | 1-BZB12SDN-BUND | 1-BZB16SDN |
| Nominal drill diameter d0 | 16.00 mm | 16.00 mm | 20.00 mm |
| Min. Drilling hole depth h1 | 54.00 mm | 55.00 mm | 70.00 mm |
| Anchor length I | 50.00 mm | 51.00 mm | 65.00 mm |
| Female thread M | M12 | M12 | M16 |
| Min. Screw-in depth I e/min | 12.00 mm | 12.00 mm | 16.00 mm |
| Max. Screw-in depth I e/min | 20.00 mm | 20.00 mm | 28.00 mm |
| Max. admissible tensile force | 8.5 kN | 8.5 kN | 12.6 kN |
| Material | Electro-galvanised steel | Electro-galvanised steel | Electro-galvanised steel |
| Weight packaging unit | 14.5 kg | 15.0 kg | 10.5 kg |
| Packaging unit | 250 pcs. | 250 pcs. | 100 pcs. |
Installation instructions
/ Drill hole in concrete wall with the correct drill diameter
/ Clean or blow out the hole to remove remaining drill material
/ Insert drop-in anchor to the desired depth
/ Fasten with the drive-in tool
/ Fasten the desired product with a corresponding screw (observe the min./max screw-in depth)
