Part no. 4KF250
Part no. 4KF250
The professional drill rig KF250 for holes with a diameter up to 250 mm.
/ Column from stainless steel
/ Reduction gear and integrated motor holder in the housing
/ Quick release fastener
/ The crank with quick exchange system can be changed easily from the left-hand side to the right-hand side
/ Hinged clamps out of stainless steel enable adjustment of the drilling angle to the front by 30° and to the back by 60°
/ As a standard, the motor plate (4KF150.1.18K) is included in the scope of delivery
/ SPECIFICATIONS | |
Motor power max. | 3.3 kW |
Torque max. | 200 Nm |
Length | 330 mm |
Width | 200 mm |
Height | 950 mm |
Travel | 590 mm |
Drilling Ø | max. 250 mm |
Weight | 16.0 kg |
Base plate | dowel base |
Fastening armature bar (recommended) | M12 |
Transmission ratio | 1:11 |
/ RECOMMENDED DRILL MOTOR
WEKA-DK32, WEKA-SR25, WEKA-SR38
/ POSSIBLE DRILL MOTOR
EDM25, EDM30, EDM33, WEKA-DKS15, WEKA-DK16.3, WEKA-DK17
Housing, cpl., with paint
Part no. 4KF150.1.0FKFK
Transmission gear 1:2.6, cpl.
Part no. 4KF150.12.00K
Crank, cpl.
Part no. 150.2.0K
Lever, cpl.
Part no. 4KF150.2.50K
Guide column 820, cpl. with hinged clamp
Part no. 4KF150.6.0KFG.K
Guide column 1300, cpl. with hinged clamp
Part no. 4KF150.6.13KFG.K
Guide column 1960, cpl. with hinged clamp
Part no. 4KF150.6.20KFG.K
Support 820 mm for retrofitting
Part no. 4KF250.21.00K
Support 1300 mm for retrofitting
Part no. 4KF250.22.00K
Support 1960 mm for retrofitting
Part no. 4KF250.23.00K
Base console steel, cpl.
Part no. 4KF150.4.0STK
Base console steel, cpl., narrow
Part no. 4KF150.4.0ST.SchK
Quick exchange spacer 50 mm, cpl.
Part no. 4KF150.1.19BGK
/ More accessories in categorie Drilling accessories